Thermo Scientific AutoPILOT PRO User Manual page 79

AutoMITTER SIB Option
CSA Certified Systems
6-6 AutoPILOT PRO Flow Computer User Guide
Figure 6–4. AutoPILOT PRO XL SIB wiring diagram
4. TB1 and TB2 on the SIB are used for connection to the AutoMITTER
PRO transmitter. Remove the cover plate to access these I.S. terminals.
Refer to 0-0497-517
wiring diagram.
Warning The cover plate must be replaced after connections are made.
5. J38 on the main board is for SIB / Comm3 selection. Install a jumper
to select SIB.
6. Return the main board and mounting bracket to the down position,
tighten the thumbscrews, and shut the enclosure door.
for a detailed AutoMITTER PRO transmitter

Thermo Fisher Scientific