Thermo Scientific AutoPILOT PRO User Manual page 43

Installing the Basic System
Installing the Internal Battery
3-12 AutoPILOT PRO Flow Computer User Guide
Figure 3–10. Bracket for internal battery
4. Connect the solar charger input (TB10 on the main board) to the solar
panel as shown in the following table.
Table 3–4. TB10 to solar panel connections
Color
Black
Red
5. Connect the internal battery to TB1 on the enclosure door panel as
shown below.
Table 3–5. Internal battery to TB1 connections
Color
Black
Red
6. Return the main board and mounting bracket to the down position,
and shut the enclosure door.
TB10 on Main Board
TB10-2 (GND)
TB10-1 (VSOLAR)
Internal Battery
- (negative leg)
+ (positive leg)
Solar Panel
- (NEG)
+ (POS)
TB1 on Enclosure Door
TB1 positions 4–6 (NEG)
TB1 positions 1–3 (POS)
Thermo Fisher Scientific