Lan; Status; Ipv4/Ipv6 Configuration - Devolo dLAN 1200+ WiFi ac Manual

39 Network configuration

4.6 LAN

You make changes to the network settings in the
LAN area.
devolo dLAN 1200+ WiFi ac

4.6.1 Status

You can see the current LAN status of the dLAN ad-
apters here. The Ethernet area shows the network
devices connected to the two network connectors
Port 1 and Port 2 (e.g. PC, NAS, etc.).
IPv4/IPv6
Depending on how the dLAN 1200+ WiFi ac is
connected to the Internet (IPv4 or IPv6), current
network information is displayed, such as Address,
Subnet mask, Standard gateway and DNS server.

4.6.2 IPv4/IPv6 configuration

In the factory default settings, only the Retrieve
network settings from a DHCP server option for
IPv4 is enabled. This means that the IP address is
retrieved automatically from a DHCP server. The
currently assigned network data are visible (greyed
out).
If a DHCP server is already present on the network
for assigning IP addresses (e.g. your Internet rou-
ter), you should leave the Retrieve network set-
tings from a DHCP server option enabled so that
the dLAN 1200+ WiFi ac automatically receives an
address from it.