Preparations; Charging X-431 V; Using Your Battery - Launch X-431 V+ User Manual

LAUNCH

2.1 Charging X-431 V+

There are two charging methods available:
Via Power adaptor:
1. Insert one end of the included charging cable into the power adaptor.
2. Connect the other end into the charging port of the tablet.
3. Plug the adaptor into AC outlet.
Via Personal computer:
1. Insert one end of the data cable (optional) into the Universal Serial Bus port
of PC.
2. Connect the other end to the charging port of the tablet.
If appears on the screen, it indicates it is being charged. If the logo changes
into , it indicates that the battery is fully charged. Unplug the charging cable on
the charger from the tablet.
For initial use, you are strongly recommended to charge the tablet for at least 8
hours.

2.2 Using your battery

 If the battery remains unused for a long period of time or the battery is
completely discharged, it is normal that the tool will not power on while being
charged. Please charge it for a period of 5 minutes and then turn it on.
 Please use the included power adaptor to charge your tool. No responsibility
can be assumed for any damage or loss caused as a result of using power
adaptors other than the one supplied.
 While the tablet has low battery, a beep will sound. If it is very low, the tablet
will be switched off automatically.
X-431 V+ User Manual — General Operations

2 Preparations

15