Preparations; Charging; Using Battery; Power On/Off - Launch X-431 EURO TURBO User Manual

Table of Contents

There are two charging methods available:

Via Power adaptor:

1. Insert one end of the included charging cable into the power adaptor.

2. Connect the other end into the charging port of the tablet.

3. Plug the power adaptor into AC outlet.

Via Personal computer:

1. Insert one end of the included charging cable into the USB port of PC.

2. Connect the other end into the charging port of the tablet.

appears on the screen, it indicates it is being charged. If the logo changes

into

, it indicates that the battery is fully charged. Unplug the power adaptor

from the tablet.

 If the battery remains unused for a long period of time or the battery is

completely discharged, it is normal that the tool will not power on while being

charged. Please charge it for a period of 5 minutes and then turn it on.

 Please use the included power adaptor to charge your tool. No responsibility

can be assumed for any damage or loss caused as a result of using power

adaptors other than the one supplied.

 While the tablet has low battery, a beep will sound. If it is very low, the tablet

will be switched off automatically.

Press [POWER] to turn the tool on.

*Note: If it is the first time you have used this tool or the tool remains idle for a long

www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu

X-431 EURO TURBO User Manual

3 Preparations

Table of Contents