Launch X-431 V+ User Manual page 53

LAUNCH
& [FEED] for 8 seconds, the following resetting command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
3. Tap "Reset" to configure Wi-Fi printer.
Step 1: Connect the printer:
Tap "Scan"
X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap
"Connect" to enter Step 2.
Step 2: Join the Wi-Fi printer into LAN:
Tap "Scan" to select the desired local Wi-Fi network from the list, and type in
the security password (If it is an open network, password is not required), and
then tap "Confirm".
to select the
Fig. 4-37
X-431 V+ User Manual — Vehicle Diagnosis
desired printer
46
hotspot named with