Repair Data; Update - Launch X-431 V+ User Manual

LAUNCH
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter
through continuous combustion oxidation mode (such as high temperature
heating combustion, fuel additive or catalyst reduce PM ignition combustion) to
stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a) The exhaust back pressure sensor is replaced.
b) The PM trap is removed or replaced.
c) The fuel additive nozzle is removed or replaced.
d) The catalytic oxidizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is replaced.

4.6 Repair Data

This option provides abundant repair case and automotive technology handbook
for your reference.
Tap "Data" and follow the on-screen instructions to proceed.

4.7 Update

Note: To make sure the X-431 V+ is running the latest available software, it is
advisable to check for updates on a frequent basis. When checking for updates it is
important to make sure X-431 V+ has a strong Wi-Fi connection.
Before diagnosing a vehicle, you have to download the corresponding vehicle
diagnosis software.
Tap --> "Update" to enter.
Tap the serial number and a list of diagnostic software will pop up on the screen.
Note: If no several connectors are activated, please ignore this step.
X-431 V+ User Manual — Vehicle Diagnosis
42