Launch X-431 V+ User Manual page 60

LAUNCH
Item 5 in this Chapter).
3. Tap "Settings" -> "WLAN", slide the switch to ON and then choose the
desired WLAN network to connect.
4. Open the browser and visit
latest App.
5. After the installation is complete, launch the application and login with your
username and password.
6. Tap -> "Update" to download the diagnostic software.
Note: For new App, the software structure and storage space occupied by the vehicle
software have been optimized so as to avoid the occurrence of insufficient storage.
5. How to reset X-431 V+?
Resetting may cause data loss. Before doing so, please make sure important data
and information has been backed up.
Do the following to reset X-431 V+:
1. Tap "Settings" -> "Back & Reset".
2. Tap "Factory data reset".
3. Tap "Reset tablet".
4. Tap "Clear all data" to start resetting until the tool automatically reboots.
7. The diagnostic application is failing.
1. Press the Home key on the tool.
2. Select "Settings"-> "Apps".
3. Select the application name from the Apps list.
4. Select "Force Stop", and then press "OK" to confirm.
5. Select "Clear Data", and then press "OK" to confirm.
X-431 V+ User Manual — Others
www.dbscar.com
53
to download and install the