Launch X-431 V+ User Manual page 32

LAUNCH
A. Power adaptor: Connect one end of the included power adaptor to DC IN
port of X-431 V+ tablet, and the other end to AC outlet.
B. Internal battery pack
For non-OBDII vehicle, proceed as follows:
1. Locate vehicle's DLC socket.
2. Select the corresponding non-16pin connector.
3. Plug the non-16pin end of the connector into the DLC socket, and the other
end to the OBD I adaptor, and then tighten the captive screws.
4. Connect the other end of the adaptor to the included VCI connector.
5. To supply power to OBD I adaptor from:
A. Cigarette Lighter Cable: Connect one end of the cigarette lighter cable to
vehicle's cigarette lighter receptacle, and the other end to the power jack of
OBD I adaptor.
B. Battery Clamps Cable: Connect one end of the battery clamps cable to
vehicle's battery, and the other end to the power jack of OBD I adaptor.
X-431 V+ User Manual — Vehicle Diagnosis
Fig. 4-10
Fig. 4-11
25