Quadratec 92034.1020 Installation Manual page 2

A Few Words About Product Safety:
Your Quadratec Cross Bar Rack is
®
intended to enhance the utility of your
off road capable vehicle. Before installa-
tion, please review the following safety
information and installation recommen-
dations.
Before You Begin Installation:
Congratulations on your purchase of
Quadratec Cross Bar Rack for your
®
Jeep Wrangler Vehicle. These products
®
have been designed for long life and a
great performance under the toughest
conditions.
Throughout these instructions import-
ant safety information is generally
preceded by one of three signal words
indicating the relative risk of injury,
property damage or adverse conse-
quence. The signal words mean:
A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR
SERIOUS INJURY. YOU CAN BE KILLED OR SERIOUSLY HURT IF YOU DON'T FOLLOW
INSTRUCTIONS.
A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN MINOR
OR MODERATE INJURY. YOU CAN BE MODERATELY HURT AND ALSO MAY SUFFER
PROPERTY DAMAGE IF YOU DON'T FOLLOW INSTRUCTIONS.
CAREFUL ATTENTION IS REQUIRED TO THIS INSTRUCTION OR OPERATION BUT
DOES GENERALLY NOT RELATE TO PERSONAL INJURY. DAMAGE TO YOUR PRODUCT
OR OTHER PROPERTY MAY RESULT IF YOU DON'T FOLLOW INSTRUCTIONS.
When unpacking, check to make sure
all parts are included and not damaged
due to shipping. If any part is missing or
broken, please call Customer Service at
800-745-6037 as soon as possible.
Thank you again for your purchase
and let's start the installation process.
READ ALL SAFETY MESSAGES AND ALWAYS WEAR
SAFETY GLASSES WHEN WORKING WITH TOOLS.
DO NOT EXCEED 85 POUNDS OF EVENLY DISTRIBUTED CARGO
LOAD. FOLLOW FACTORY OWNERS MANUAL RECOMMENDATIONS
FOR ROOF LOAD CAPACITY AT ALL TIMES.
AFTER INSTALLATION, CHECK AND RE-TORQUE ALL FASTENERS ON
THE RACK ASSEMBLY.
The Trusted Source
2
®