Welch Allyn HR100 Directions For Use Manual page 13

Directions for Use
8. Write the start time, date, and patient data in the patient diary.
To Shut Down the Recorder (if the recorder does not stop automatically)
1. Press and hold both EVENT buttons and count the "beeps. " Release the buttons at
the start of the seventh beep. The HR300/HR1200 LCD will display a + sign indicating
successful shutdown. The HR100 green LED will stop flashing.
2. Press the EVENT button again. Did the recorder beep?
•
•
•
Data transfer to the Workstation
Refer to the Holter System Application operating instructions for transferring the Holter
procedure data to the Holter PC.
WARNING Discard electrodes after one use.
If the recorder does not beep, the recorder was successfully shut down.
If the recorder beeps, repeat the shutdown procedure.
Remove the battery and SD card.
9