Technical Specifications - Welch Allyn HR100 Directions For Use Manual

Directions for Use

Technical Specifications

Deviations from the range of specifications stated below may result in device
performance degradation.
Table 5. Holter Recorder Characteristics
Characteristic
Length
Width
Height
Weight with battery (or batteries)
and patient cable
Table 6. Operation
Power source
Recording period
Storage capacity
Storage period
Battery Life
Pacemaker Detection
Effective A/D bit
Resolution
Dynamic Range
Frequency Response
Sampling Rate
Table 7. Environmental Specifications
Operating Temperature 32° F to +113° F (0° to 45° C)
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Storage Altitude
Operating Shock
Storage Shock
Operating Vibration
Storage Vibration
HR 100
3.8 in (96.5 mm)
2.2 in (56 mm)
0.7 in (18 mm)
7 oz. (198 g)
AA (size LR6) Alkaline battery or batteries
Minimum 24 hours continuous
®
SanDisk 256 MB Secure Digital (SD) card for 200 sps (HR100, HR300, HR1200)
®
SanDisk 1 GB Secure Digital (SD) card for 200, 500, 1000 sps (HR300, HR1200)
Data remains valid for >5 years or until SD card is initialized
Minimum 24 hours
ANSI/AAMI EC38-1998
0.5 uV
+/-330 mV
0.05 Hz to 100 Hz
HR100 200 sps
HR300/HR1200 200, 500, 1000 sps
-4° F to +149° F (-20° to +65° C)
5 to 95% non-condensing
5 to 95% non-condensing
-500 to 15,000 ft. (-150 to 4500 m)
-500 to 50,000 ft. (-150 to 15500 m)
2.95 in (75 mm) drop to hard surface on any axis
31.5 in (0.8 m) drop to hard surface on any axis
0.0002 G2/Hz from 5 to 350 Hz, ramping to 0.0001 G2/Hz from 350 to 500 Hz, random vibration
spectrum, 10 minutes in each of three orthogonal axes.
Packaged recorder and accessories survived standard drop and vibration procedure published
by the National Safe Transit Association, pre-shipment test procedure, March 1977.
HR 300 & HR 1200
4.4 in (112 mm)
3.1 in (78 mm)
1.4 in (36 mm)
10 oz. (283 g)
19