Interruption Of Work; Shutting Down And Cleaning - WAGNER WallPerfect I-Spray 1800 Manual

WallPerfect I-Spray 1800

Interruption of Work

•
Turn the machine off.
•
During longer breaks, vent the container by briefly opening and then closing it again.
•
Clean nozzle openings after an interruption in operation.
Make sure that the container is secure when setting down the WallPerfect
i
spray attachment.

Shutting down and cleaning

Please also refer to the instructions of the basic device.
1. Switch the unit off.
2. Unscrew the container and empty it. Pull out the suction tube with container seal.
3. Preclean the container and feed tube with a brush. Clean the ventilating bore
(Fig. 1, C).
4. Pour water or solvent into the container. Screw the container back on.
Do not use flammable materials for cleaning purposes.
5. Turn on the machine and spray the solvent or water into a container or a cloth.
6. Repeat the above procedure until the water or solvent emerging from the nozzle is
clear.
7. Turn off the machine and remove the plug.
8. Unscrew the container and empty it. Pull out the suction tube with container seal.
We recommend the use of a common household washing-up brush to clean
i
the container.
CAUTION! Never clean seals, diaphragm and nozzle or air
holes of the spray gun with metal objects.
The ventilation hose and diaphragm are only solvent-resistant to a limited
extent. Do not immerse in solvent, only wipe.
9. Pull the ventilating hose (fig. 1 A, 15) at the top from the gun body. Screw off the valve
cover (16). Remove the diaphragm (17). Clean all the parts carefully.
10. Remove the adjustment ring (fig. 6,1) carefully from the union nut (2).
11. Unscrew the union nut and remove the air cap and nozzle. Clean the air cap, nozzle
seal and nozzle with a brush and solvent or water.
GB
9