11.
Lubrication of the machine
The lubrication process:
■
Reduces wear and friction
■
Increases the lifetime
■
Protects metal surfaces from corrosion
We recommend:
■
A class 2NLGI multi-purpose grease for lubrication
■
A lubrication oil with a viscosity of 100 mm ²/s for oiling
The machine is to be lubricated every 8 hours of operation in accordance with the lubrication plan. The
lubrication points.
■
Dovetail guide, base plate
■
Dovetail guide, upper slide
■
Dovetail guide, Z-column
■
Trapezoidal thread spindles
■
Sleeve and feed pinion (for sleeve stroke)
Are lubricated with the help of an oil can and an ordinary lubrication oil by moving the slide or sleeve
backwards and forwards.
All other lubrication points are lubricated with a grease press or a brush using multi-purpose grease.
1
2
30
Every 8 hours of operation
Every 8 hours of operation