Table of Contents
Advertisement
1.
Important safety notes
1.6
Explanations of the symbols
10
With a measured noise level of 80 dB (A) at the workpla-
ce the operator should wear Ear Protection.
Caution:
Always pull the power plug prior to any maintenance
work!
Read the operating instructions prior to initial operation or
maintenance work!
Caution:
Dangerous electric voltage
If the gripper of the tool changer is not swiveled in, the
positioning of the main spindle
(Z-axis) is admissible.
If the gripper of the tool changer is swiveled in, the posi-
tioning of the main spindle, (Z-axis) is not admissible. If
applicable, the gripper has to be swiveled out manually.
The operating pressure for the tool changer has to be set
to 5 bar at the pressure regulator of the machine.
Advertisement
Table of Contents
