Hanging Table - Hobby OPTIMA ONTOUR EDITION 2019 Manual

5
2
Hanging table with extendable table top

Hanging table

The lower table top of the hanging table can be turned out.
When lowered, the hanging table can be used as a base frame
for the bed.
To lower
• Fully close the lower, extendable table top
into place by itself.
k
• Press the lock down
• Raise the front end of the table top
• Pull down the lower section of the table leg
remove it.
• Pull the table top out of the upper wall bracket
• Hook the table top into the lower wall bracket
4
3
1
j
until it locks
by approx. 30°.
l
and
m
.
n
o
.
8
Locking pin underneath the table top
• Push the lock back up again to lock the table securely in the
bracket.
• Place the shortened supporting leg
the table top on the floor.
To swivel out
q
• Pull the locking pin .
• Swivel the lower table top
The A65 GM and A70 GM models do not have a exten-
dabletable top.
In models with overcab beds, the hanging table cannot be
lowered, because there is no need to convert it into a bed
as you have the alcove bed.
6. Interior Structure
7 6
at the front edge of
p
to the desired position.
j
57