Hanging Table - Hobby optima Manual

06-7 Interior Structure
3
4

Hanging table

When lowered, the hanging table can be used as a base frame
for the bed.
To lower
• Fully retract the lower, pivotable table top
into place by itself.
• Press the lock down
k
• Raise the front end of the table top
• Pull down the lower section of the table foot
remove it.
• Pull the table top out of the upper wall bracket
• Hook the table top into the lower wall bracket
must move up to lock into place.
5
6
1
2
until it locks
j
by approx. 30°.
l
and
m
.
n
o
. The lock
• Place the shortened supporting leg
the table top on the floor.
To swivel out
• Pull the locking pin .
q
• Swivel the lower table top
The A65 GM and A70 GM models do not have a pivotable
table top.
In models with alcove beds, the hanging table cannot be
lowered, because there is no need to convert it into a bed
as you have the alcove bed.
8
7
at the front edge of
p
to the desired position.
j