IBM FC EJ08 Manual page 40

Figure 19. Removing SFP transceivers from adapters
6. If necessary, remove the adapter from the antistatic package.
Attention: Avoid touching the components and gold connectors on the adapter.
Removing the tailstock from a new adapter
7. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
8. Using a Phillips screwdriver, unscrew the two retaining screws (A) that attach the high-profile
tailstock (B) to the new PCIe adapter, as shown in Figure 20 on page 27.
26 Power Systems: PCIe adapters for the 9080-M9S