Managing pcie adapters for ibm power system l922 9008-22l; ibm power system s922 9009-22a; ibm power system h922 9223-22h; ibm power system s914 9009-41a; ibm power system s924 9009-42a; ibm power system h924 9223-42h; ibm emx0 pcie gen3 i/o expansion dra (226 pages)
Page 6
2. First, remove power cords from outlet. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power cords to outlet. 4. Remove all cables from devices. 5. Turn device ON. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Page 7
Statement 3: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device.
Page 8
IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Chapter 5, “Troubleshooting” on page 25 covers the types of installation problems that can cause the IBM TotalStorage FAStT FC2-133 Host Bus Adapter to function incorrectly. Appendix A, “Getting help and technical assistance” on page 27 describes how to obtain help, service, and information about IBM products.
Notices used in this book The caution and danger statements used in this book also appear in the multilingual Safety Information book provided with your IBM TotalStorage FAStT FC2-133 Host Bus Adapter. Each caution and danger statement is numbered for easy reference to the corresponding statements in the safety book.
(DMA), bus master, Fibre Channel host adapter designed for high-end systems. The function and performance are derived from the ISP2312 chip (see Figure 2 on page 4), making this IBM TotalStorage FAStT FC2-133 Host Bus Adapter a leading-edge host adapter.
If the nonvolatile random access memory (NVRAM) (also referred to as NOVRAM) is damaged, the system prompts you for the FAStT FC2-133 Adapter serial number. Figure 1 on page 3 shows the serial number label location. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Do not place the device on your system unit cover or on a metal table. v Take additional care when handling devices during cold weather because heating reduces indoor humidity and increases static electricity. Chapter 1. Preparing and installing the IBM TotalStorage FAStT FC2-133 Host Bus Adapter...
Optical interface connector Figure 2. FAStT FC2-133 Adapter components 1. This option does not come with the IBM TotalStorage FAStT FC2-133 Host Bus Adapter. It must be ordered separately. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Low Profile 2U bracket, continue with step 1. Otherwise, go to step 2. 1. Complete the following steps to install the Fibre Channel Low Profile 2U adapter bracket: Chapter 1. Preparing and installing the IBM TotalStorage FAStT FC2-133 Host Bus Adapter...
Page 20
FAStT FC2-133 Adapter. 8. Align the adapter with the expansion slot. Carefully press the adapter into the PCI bus-master slot until it is fully seated and secure. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Page 21
If the information displayed is correct, go to Chapter 2, “Updating the FAStT FC2-133 Adapter BIOS code and installing device drivers” on page 9 for detailed instructions on how to update the FAStT FC2-133 Adapter BIOS code. Chapter 1. Preparing and installing the IBM TotalStorage FAStT FC2-133 Host Bus Adapter...
Page 22
IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Complete the following steps to update your FAStT FC2-133 Adapter BIOS code and NVRAM: 1. Insert the IBM TotalStorage FAStT FC2-133 Host Bus Adapter Support CD into the CD-ROM drive. Restart the server. Your server starts to a DOS prompt.
Page 24
To write NVRAM and flash an adapter at I/O address f800, type: Press Enter. v To write NVRAM and flash all adapters, type: Press Enter. v To save NVRAM to file QL1xNVRM.SAV, type: IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Complete the following steps to update the FAStT FC2-133 Adapter BIOS code using the flasutil BIOS Update Utility menu: 1. Insert the IBM TotalStorage FAStT FC2-133 Host Bus Adapter Support CD into the CD-ROM drive. Restart the server. Your server starts to a DOS prompt.
For Microsoft Windows NT 4.0 or Windows 2000 Complete the following steps to create a BIOS Update Utility diskette for Microsoft Windows NT 4.0 or Windows 2000 from the IBM TotalStorage FAStT FC2-133 Host Bus Adapter Support CD: 1. Insert the IBM TotalStorage FAStT FC2-133 Host Bus Adapter Support CD into the CD-ROM drive.
9. Remove the diskette from the diskette drive and label the diskette appropriately. 10. To update the FAStT FC2-133 Adapter BIOS code and NVRAM using the BIOS Update Utility from the diskette, choose one of the following methods: v flasutil command prompt. Use this method to type in command-line options. v flasutil BIOS Update Utility menu.
Page 28
To save NVRAM to file QL1xNVRM.SAV, type: Press Enter. v To update BIOS NVRAM defaults, type: Press Enter. v To verify NVRAM in all adapters, type: Press Enter. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Using the flasutil BIOS Update Utility menu (from the diskette) Complete the following steps to update your FAStT FC2-133 Adapter BIOS code and NVRAM using the flasutil BIOS Update Utility: 1. Insert the BIOS Update Utility diskette into the diskette drive and restart the server.
Installing the FAStT FC2-133 Adapter device drivers The device drivers and installation instructions for the following supported operating systems are provided on the IBM TotalStorage FAStT FC2-133 Host Bus Adapter Support CD: v Microsoft Windows v Windows NT v Novell NetWare...
Important: If the configuration settings are incorrect, your FAStT FC2-133 Adapter will not function properly. Do not modify the default configuration settings unless you are instructed to do so by an IBM support representative or in the installation instructions. Configuration Settings menu options The options described in this section configure the Fibre Channel devices and the FAStT FC2-133 Adapter to which they are attached.
Interrupt level: The interrupt level is the interrupt that is used by the FAStT FC2-133 Adapter. The interrupt level can change when the operating system is installed. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
When a port reaches its execution throttle, Fast!UTIL does not run any new commands until the current command is completed. The valid options for this setting are 1 through 256. The default (optimum) is 256. Chapter 3. Using IBM Fast!UTIL...
The RIO mode enables you to post multiple command completions in a single interrupt (see Table 6 on page 21). The default is 0. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Channel loop back connector option must be installed into the optical interface connector on the FAStT FC2-133 Adapter before starting the test. See Figure 2 on page 4 for the location of the optical interface connector. Chapter 3. Using IBM Fast!UTIL...
Use this option to select, configure, or view a specific adapter if you have multiple adapters in your system. ExitFast!UTIL After you complete the configuration, use the ExitFast!UTIL option to exit the menu and restart the system. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Page 38
Total cable length cannot exceed 500 meters. Form factor 6.47 cm x 16.75 cm (2.54 in. x 6.6 in.) Operating power Less than 15 watts IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
If you are having problems, use the following information to help you determine the cause of the problem and the action to take. Note: Additional troubleshooting and debugging procedures are available in the IBM Fibre Channel Hardware Maintenance Manual and IBM Fibre Channel Problem Determination Guide at http://www.ibm.com/pc/support. Hardware problems...
If your Fibre Channel switch supports zoning, make sure that your peripheral device is configured to the same switch zone as the FAStT FC2-133 Adapter. For more information, refer to your Fibre Channel switch documentation. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
IBM to assist you. This appendix contains information about where to go for additional information about IBM and IBM products, what to do if you experience a problem ®...
Setting up e-mail notification of technical updates about your products Software service and support Through IBM Support Line, you can get telephone assistance, for a fee, with usage, configuration, and software problems with xSeries servers, IntelliStation workstations, and appliances. For information about which products are supported by Support Line in your country or region, go to http://www.ibm.com/services/sl/products/.
Prior to on-site warranty service, you are required to go through problem determination with an IBM service specialist call center technician. A warranty period of 3 years on parts and 1 year on labor means that IBM will provide warranty service without charge for: 1.
IBM hardware repair - If the problem is determined to be caused by IBM hardware under warranty, trained service personnel are available to provide the applicable level of service, either on-site or at an IBM service center as determined by IBM.
Purchasing additional services During and after the warranty period, you can purchase additional services, such as support for IBM and non-IBM hardware, operating systems, and application programs; network setup and configuration; upgraded or extended hardware repair services; and custom installations. Service availability and service name might vary by country or region.
Country-unique Terms. The terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
Page 47
IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.
“Machine” includes Machine Code and Licensed Internal Code. This limit also applies to IBM’s suppliers and your reseller. It is the maximum for which IBM, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE);...
Page 49
Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation. Limitation of Liability: The following is added to this Section: Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other similar legislation, IBM’s liability is limited to the repair or replacement of the goods...
Page 50
2. as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to, or in any way related to the subject of this Statement of Limited Warranty, IBM’s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim.
Page 51
Machine in any of those countries from either (1) an IBM reseller approved to perform warranty service or (2) from IBM. If you purchase an IBM Machine in a Middle Eastern or African country, you may obtain warranty service for that Machine from the IBM entity within the country of...
Page 52
IBM with fraud or gross negligence and for express warranty. The following sentence is added to the end of item 2: IBM’s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence.
Page 53
Services Act 1982. Applicability of suppliers and resellers (unchanged). The following is added to the end of this Section: IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be limited to damages.
Page 54
IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Web sites. The materials at those Web sites are not part of the materials for this IBM product, and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM. IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Consult an IBM authorized dealer or service representative for help. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits.IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a nonrecommended modification of the product, including the fitting of non-IBM option cards. This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to CISPR 22/European Standard EN 55022.
Page 60
IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...
Page 62
23, 24 trademarks 42 troubleshooting Fibre Channel 26 hardware 25 installation problems 25 system configuration 25 updating the BIOS code using the command prompt 9 using the utility diskette 11 IBM TotalStorage FAStT FC2-133 Host Bus Adapter: Installation and User’s Guide...