Supermicro X10QRH+ User Manual page 73

Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When
this item is set to Immediate, the BIOS ROM of the host adaptors will immediately
capture Interrupt 19 at bootup and allow the drives that are attached to these host
adaptors to function as bootable disks. If this item is set to Postponed, the BIOS
ROM of the host adaptors will only capture Interrupt 19 during bootup from a legacy
device. The options are Immediate and Postponed.
Re-try Boot
If this item is set to Enabled, the system BIOS will continuously try to boot from
the selected boot drive. The options are Disabled, Legacy Boot, and EFI Boot.
Power Confi guration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to automatically reboot when
a non-recoverable error that lasts for more than fi ve minutes occurs. The options
are Enabled and Disabled.
Power Button Function
If this item is set to Instant Off, the system will power off immediately as soon as
the user presses the power button. If this item is set to 4 Seconds Override, the
system will power off when the user presses the power button for 4 seconds or
longer. The options are Instant Off and 4 Seconds Override.
Restore on AC Power Loss
Use this item to set the power state after a power outage. Select Stay Off for the
system power to remain off after a power outage. Select Power On to turn on the
system power after a power outage. Select Last State to allow the system to resume
its last power state before a power outage. The options are Power On, Stay Off,
and Last State.
CPU Confi guration

This submenu displays the following CPU information as detected by the BIOS. It
also allows the user to confi gure CPU settings.
Processor 0/Processor 1/Processor 2/Processor 3

This submenu displays the following information of the CPU installed in Socket 0,
Socket 1, Socket 2, and Socket 3.
•
Processor Socket
4-5
Chapter 4: AMI BIOS