Receiver Panel
Number
Name
1
HDMI OUT
2
CAT IN
3
Power Indicator
Lamp (Green)
4
Data signal
Indicator Lamp
(Orange)
5
SERVICE port
6
IR IN
7
DC 12V
Function description
Connect to HDMI display device such as TV or Projector with an HDMI
cable.
Connect CAT6 cable from "CAT OUT" port on the Transmitter.
The lamp will illuminate when the Receiver is powered ON.
The lamp will illuminate when the Transmitter and the Receiver have
signal transmission.
For firmware update use.
Connect wideband IR Receiver cable here. The IR signal will be sent to
the IR OUT port of the Transmitter.
Plug 12VDC/1A power supply into the unit and connect the adapter to an
AC outlet.
(Note: The extender supports PoC function; If the power supply is used
for the Receiver, the Transmitter does not require one)
4