Features and Functions
Transmitter Panel
Number
Name
1
HDMI OUT
2
HDMI IN
3
CAT OUT
4
Power Indicator
Lamp (Green)
5
Data signal
Indicator Lamp
(Orange)
6
SERVICE port
7
IR OUT
8
DC 12V
Connect to HDMI display device such as TV or Projector with an HDMI
cable.
Connect to HDMI source device such as DVD or PS4 player with an HDMI
cable.
Connect CAT6 cable between this and "CAT IN" port on the Receiver
The lamp will illuminate when the Transmitter is powered ON.
The lamp will illuminate when the Transmitter and the Receiver have
signal transmission.
For firmware update use.
Connect wideband IR Blaster cable here. The IR signal is from the IR IN
port of the Receiver.
Plug 12VDC/1A power supply into the unit and connect the adapter to an
AC outlet.
(Note: The extender supports PoC function; If the power supply is used for
the Transmitter, the Receiver does not require one)
3
Function description