Overview; Model Allround 970; Handling The Wheelchair; Use - Ortopedia ALLROUND 970 Operating Manual

3. Overview

3.1 Model ALLROUND 970

The overview (Fig. 1+2) shows the most important components and
control units.
3.1.1 Overview
5
4
6
7
3
2
1 8
1
Foot plate
Calf strap
Seat upholstery
Control unit
Armrest
Push handle
Backrest
Swivel wheel
8
3
2
1
5
6
2
Bumper
Rear cover
Headrest
Lighting unit
Selection lever for drive mode push
mode
Drive wheel
Drive mode Push mode
4. Handling the
wheelchair

4.1 Use

The electric wheelchair, with attached
legrests and armrests, serves exclusive-
ly for the conveyance of one sitting per-
son. Other pulling or transporting uses
do not comply with its intended purpose.
Attention:
Comply with the contents of the
!
'Safety Information for Electric Vehicles'
4
brochure!
The ALLROUND 970 wheelchair is in-
tended for use indoors and outdoors.
The model has been assigned the 'Use
Class B' as per the EN12184 standard.
For outdoor on a firm surface, the wheel-
chair must be equippped with a light-
ing system.
Depending on the foot plate height
adjustment, the electric wheelchair can
cross obstacles with a max. height of 60
mm.
Higher obstacles up to 110 mm high can
be crossed with a 'step climber'.
4.2 Tips for accident
prevention

4.2.1 Initial driving practice

A low maximum speed must be pre-se-
lected on the control unit for the initial
driving practice. Make yourself familiar
with the driving behaviour of the elec-
tric wheelchair in small steps. The elec-
tric wheelchair should not be used out-
side of the familiar environment or on
public highways before you have a safe
control of the vehicle.
9