Cleaning And Maintenance; Disassembling; Cleaning - ResMed AirCurve 10 ST-A Clinical Manual

Cleaning and Maintenance

It is important that the AirCurve 10 device is cleaned regularly to ensure optimal therapy. The
following sections will help with disassembling, cleaning, checking and reassembling the device.
WARNING
Regularly clean the tubing assembly, water tub and mask for optimal therapy and to prevent
the growth of germs that can adversely affect the patient's health.

Disassembling

1. Hold the water tub at the top and bottom, press it gently and pull it away from the device.
2. Open the water tub and discard any remaining water.
3. Hold the cuff of the air tubing and gently pull it away from the device.
Grip the retention clip and pull up to release the power cord.
4. Hold both the cuff of the air tubing and the swivel of the mask, then gently pull apart.

Cleaning

You should clean the device weekly as described. Refer to the mask user guide for detailed
instructions on cleaning the mask.
1. Wash the water tub and air tubing in warm water using mild detergent.
Do not wash in a dishwasher or washing machine.
2. Rinse the water tub and air tubing thoroughly and allow to dry out of direct sunlight and/or heat.
3. Wipe the exterior of the device with a dry cloth.
30