Setting The Date And Time; Quicknav; Settings Menu; Therapy - ResMed AirCurve 10 ST-A Clinical Manual

Setting the date and time

Before you set up a new patient and start therapy for the first time, make sure you set the correct
local date and time on the device. If you set the date and time after starting therapy, you may lose
patient data.
1. In Settings menu, select Date and change the setting to the correct date.
2. Select Time and change it to the correct local time.
3. Make sure the correct local time and date has been applied.
The AirCurve 10 settings must be configured for each individual patient. The settings should be
periodically reassessed to ensure optimal therapy.

QuickNav

QuickNav is a feature that provides quick navigation between the Monitoring screens and the
Settings menu. Changes can be made to the patient's settings whilst the patient is receiving
treatment.
To use QuickNav:
• From the Clinical Menu, press the Home button twice to switch back and forth between the
Monitoring screens and the Settings menu.

Settings menu

You set all parameters relating to a patient's therapy and device configuration in the Settings menu.
Note: Not all parameters are available in all regions. The default and range values may differ
between modes and regions.

Therapy

Parameter Description
Mode Sets the therapy mode
available on the device.
Set Pressure Sets the fixed treatment
pressure.
IPAP Sets the pressure to be
delivered to the patient
when the device is
triggered into inspiration.
18
Mode
S ST T PAC iVAPS CPAP
   
   
Range
 
4–20 cm H

0.2 cm H
increments
4–30 cm H
0.2 cm H
increments
O (4–20 hPa),
2
O (0.2 hPa)
2
O (4–30 hPa),
2
O (0.2 hPa)
2