Options; Configuration - ResMed AirCurve 10 ST-A Clinical Manual

Options

Parameter Description
Essentials Set the level of access available to the patient.
Confirm Stop Enable / disable the Confirm Stop feature. When enabled, if you press
Start/Stop during therapy, the Confirm Stop screen will appear. If YES is
selected, therapy stops. If NO is selected therapy will continue.
™
SmartStart Enable / disable the SmartStart feature. If you enable the SmartStart
feature, the device will start automatically when the patient breathes into
the mask and then stop automatically when the patient removes the
mask.
Therapy LED Enable / disable the Therapy LED. When enabled, the Home button will
remain illuminated when treatment is in progress.
Reminders
Mask Set a recurring reminder to the patient to replace the mask.
Humidifier Set a recurring reminder to the patient to replace the humidifier.
Tube Set a recurring reminder to the patient to replace the air tubing.
Filter Set a recurring reminder to the patient to replace the air filter.

Configuration

Parameter Description
Language Set the display language.
(Not all languages available in all regions.)
Date Set the current date.
If you set a new date that occurs in the past then an error message is
displayed. Before this change can be made, erase the compliance data
available under the Configuration menu.
Time Set the current time.
If you set a new time that occurs in the past then an error message is
displayed. Before this change can be made, erase the compliance data
available under the Configuration menu.
Press. Units Set the unit of pressure in which pressure is displayed.
Desat. Rule Set the oxygen desaturation threshold in accordance with the AASM
criteria.
Temp. Units Set the temperature units.
22
Range
On / Plus
Off / On
Off / On
Off / On
Off / 1– 24 mths, 1 month
increments
Off / 1–24 mths, 1 month
increments
Off / 1–24 mths, 1 month
increments
Off / 1–24 mths, 1 month
increments
Selection
English / Français / Español /
Português
DD Mmm YYYY
24 hours
cm H O / hPa
2
3% / 4%
°F / °C