User Interfaces; Standard Control Panel - Grundfos TPE2 Installation And Operating Instructions Manual

11. User interfaces

WARNING
Hot surface
Death or serious personal injury
- Only touch the buttons on the display as
the product may be very hot.
WARNING
Electric shock
Death or serious personal injury
- If the control panel is cracked or
perforated, replace it immediately.
Contact the nearest Grundfos sales
company.
You can make pump settings by means of the
following user interfaces:
Control panels
•

Standard control panel.

See section 12. Standard control
• Advanced control panel.
See section 13. Advanced control
Remote controls
• Grundfos GO.
See section 15. Grundfos
If the power supply to the pump is switched off, the
settings are stored.
12. Standard control panel
Pump variant Fitted as standard
TPE3, TPE3 D
TPE2, TPE2 D
Fig. 27 Standard control panel
20
panel.
panel.
GO.
Option
- -
● -
1
2
3
4
Stop
5
Pos. Symbol Description
Grundfos Eye
Shows the operating status of
1 the pump.
See section
for further information.
Light fields for indication of
2 -
setpoint.
Up and down. Changes the
3
setpoint.
Allows radio communication
with Grundfos GO and other
products of the same type.
When you try to establish radio
communication between the
pump and Grundfos GO or
another pump, the green
4
indicator light in Grundfos Eye
on the pump flashes
continuously. Press
pump control panel to allow
radio communication with
Grundfos GO and other
products of the same type.
Makes the pump ready for
operation as well as starts and
stops the pump.
Start
If you press the button when
the pump is stopped, the pump
only starts if no other functions
5 with higher priority have been
enabled. See section
19. Priority of
Stop
If you press the button when
the pump is running, the pump
always stops. The "Stop" text
next to the button is on.
20. Grundfos Eye
on the
settings.