Advertisement
PARTS REQUIRED:
x2
x2
5/8 x 47-7/8 x 48"
(1,6 x 121,6 x 121,9 cm)
Keep spacing between the center of the rafters at the lower edge of the panel and
4
secure with one 2" nail into each rafter (Fig. E).
Move to the top of the panel and keep spacing between the center of the rafters. Secure with
one 2" nail into each rafter (Fig. E).
Nail the roof panel using 2" nails 6" apart on edges and 12" apart inside panel.
NOTE: Measurements from outside of rafters
22-3/8"
24"
(56,8 cm)
(61 cm)
5
Attach 47-7/8 x 48" roof panel Á ush to À rst panel,
Á ush at peak of corner brace (Fig. F, G).
Attach lower 23-7/8 x 96" roof panel Á ush
to top panels.
Note the panels seams are offset from
the À rst panels installed.
Attach lower 23-7/8 x 48" roof panel
Á ush to top and lower panel as
shown.
Nail roof panels using 2" nails 6"
apart on edges and 12" apart inside
panel.
NOTE: Panels will overhang rafter
approximately 1-5/8" (4,1 cm).
Repeat Steps 1-5 on opposite side to
complete roof panel installation.
5/8 x 23-7/8 x 96"
(1,6 x 60,6 x 243,8 cm)
24"
24"
(61 cm)
(61 cm)
2" Nails
Fig. E
3/4"
(1,9 cm)
Flush
ROOF PANELS
x2
5/8 x 23-7/8 x 48"
(1,6 x 60,6 x 121,9 cm)
24"
22-3/8"
(61 cm)
(56,8 cm)
Flush
3/4"
(1,9 cm)
Fig. G
24
x176
2" (5,1 cm)
Top of panel Á ush to
peak of center brace
Fig. F
Flush
12"
(30,5 cm)
12"
(30,5 cm)
Flush
6"
(15,2 cm)
6"
(15,2 cm)
Advertisement
