Conventions Used; Terminology Used - Lenze EL 1800 System Manual

1.2

Conventions used

This documentation uses the following conventions to distinguish between different
types of information:
Spelling of numbers
Decimal separator
Text
Program name
Icons
Page reference
Documentation reference
1.3

Terminology used

Term
IPC
CPC
CS
EL
MP
Thin Client
PLC
EDSIPCx7 EN 4.1
About this documentation
Point In general, the decimal point is used.
For instance: 1234.56
» « PC software
For example: »Engineer«, »Global Drive
Control« (GDC)
^
Reference to another page with additional
information
For instance: ^ 16 = see page 16
,
Reference to another documentation with
additional information
For example: , EDKxxx = see
documentation EDKxxx
Meaning
Industrial PC
Cabinet PC; control cabinet PC with decentralised
display/operating unit (MP, Thin Client)
Command Station; stand−alone operator station
Embedded Line PC; for installation in control cabinets, machine
panelling, or other mounting cutouts
Monitor panel; external display
Device for representing and operating applications which are
located on a remote host computer (e.g. CPC).
Programmable Logic Controller
l
Conventions used
1
5