Overview Of Designs - Lenze EL 1800 System Manual

3 Product description

Overview of designs

3.3 Overview of designs
By a consequently implemented platform strategy Industrial PCs can be individually
assembled and nearly optionally scaled with regard to power, display size, and function. By
this, three different designs are provided from which the customised platform for the
automation solution can be selected in each case.
In the Embedded Line and Command Station types apart from the Industrial PCs also Thin
Clients (EL 1800 − 9800 TC, CS 5800 − 9800 TC) and monitor panels (MP 800 − 9000 DVI,
CS 5000 − 9000 DVI) are available.
Design
Type
Mounting /
installation
Enclosure
Screen
Product benefits
14
Embedded Line Command Station
EL 1800 − 9800 CS 5800 − 9800
EL 1800 − 9800 TC CS 5800 − 9800 TC
MP 800 − 9000 DVI CS 5000 − 9000 DVI
In mounting cutout Stand−alone on a support
of machine arm or wall
panelling / control
cabinets
Front: IP65, rear
side: IP20
TFT display with touch sensors
26.4 cm ... 48.3 cm 38.1 cm ... 48.3 cm
(10.4" ... 19") (15" ... 19")
l l
Compact, Stand−alone, robust,
mechanically command station
robust panel PC protected against dust
l and splash water to all
Fanless
sides
operation is
possible as an l Flat design housing
option with rear mounting
l frame
Decentralised
l
design possible Support arm mounting
l or wall mounting
Expansible via
l
MC card Decentralised design
possible
l Expansible via MC card
l
Cabinet PC
CPC 2800
CPC 5100
CPC 9100
In the control
cabinet on a wall
IP65 IP20
Externally
l
Compact,
mechanically
robust control
cabinet PC
l Decentralised
design
l
Expansible via
MC card
Cabinet PC
3241 C
In the control
cabinet on DIN rail
IP20
Externally
l
Compact,
mechanically
robust control
cabinet PC
l Decentralised
design
l
Expansible via
MC card
l
Expansible via
I/O compound
modules
EDSIPCx7 EN 4.1