Managing Calls; Automatic Call Answering; Rejecting A Call; Setting The Volume - Silvercrest SBTF 10 D4 Manual

Managing calls

If you have connected two mobile phones to the hands-free
set simultaneously, you can put one call on hold, take a call
on the second mobile phone and toggle between the two
calls.
♦ Press the
second mobile phone while talking on the first mobile
phone. The first call is put on hold.
♦ Press the
two calls. When the current call is finished, the hands-free
set switches automatically to the second ongoing call.
♦ Press the
call and automatically accept the second call.

Automatic call answering

If automatic call answering is activated on your mobile
phone, it will automatically accept incoming calls after a
preset time and re-route them to the hands-free set. For more
information on automatic call answering, refer to the instruc-
tion manual of your mobile phone.

Rejecting a call

Reject an incoming call by pressing the
briefly.

Setting the volume

You can set the volume for the hands-free set using
the button
♦ During the call, press the
ume. You will hear a beep when you reach the maximum
volume.
♦ Press or hold the
decrease the volume. You will hear a beep when you
reach the minimum volume.
│ GB │ IE
■ 42
button briefly to accept a call on the
button again briefly to toggle between the
button twice briefly to end the current
and the button
button
button
.
button to increase the vol-
during the call to
twice
SBTF 10 D4