Making Calls; Accepting / Rejecting Calls; Volume Setting - Silvercrest SFA 4.1 E1 Operating Instructions Manual

SilverCrest SFA 4.1 E1

9.4 Making calls

To make a call, select the phone number on your mobile phone in the normal way. Buttons 3, 4, 5 and 8 rapidly flash
blue while a connection is being established. Once the phone connection is established, buttons 3, 4, 5 and 8 flash
blue once followed by a long pause.

9.5 Accepting / rejecting calls


The hand-free kit rings for an incoming call. Buttons 3, 4, 5 and 8 flash blue in rapid succession while the
connection is being established. You can accept the call by briefly pressing the phone button (2). Once the
phone connection is established, buttons 3, 4, 5 and 8 flash blue once followed by a long pause.

To reject the call, hold down the phone button (2) for about two seconds until you hear a beep.
If two of a user's phones are connected to the hands-free kit at the same time and a call is already in
progress via the hands-free kit, a call on the second phone is handled as follows: If the second call is
accepted using the hands-free kit, the first call is interrupted and ended at that moment.

9.6 Volume setting

You can increase the volume as needed during a call using the + button (4). A beep sounds if the maximum volume is
reached. You can also reduce the volume using the - button (5). A beep sounds if the minimum volume is reached.
94 - English