CONTENT Safety instructions Correct Usage Introduction Items supplied Technical data Operating Elements Installing the hands-free appliance in a vehicle Switching the hands-free appliance on and off Coupling the hands-free appliance with a mobile telephone Coupling the hands-free appliance with several mobile telephones Separating the connection Re-establishing the connection...
Page 4
Using the hands-free appliance Troubleshooting Cleaning and Care Disposal Warranty & Service Importer Information regarding the conformity declaration 18...
® BLUETOOTH Safety instructions Please read these operating instructions carefully and fold out the page with illustrations when you do so. Closely heed this information when operating the appliance. Should you have any further questions regarding use, please contact the service department responsible for your country. Keep these operating instruc- tions in a safe place and pass them on to whomsover might later acquire the appliance.
General safety instructions • Do not attempt to open or repair the appliance. Should you do so, appliance safety can no longer be assured and the warranty becomes void. • Have the defective device repaired by customer service or an authorised specialist only.
Correct Usage The Bluetooth ® Hands-Free Kit SBTF 10 A1 is designed for use in vehicles with a ® voltage of 12-24 V. The handsfree phone system uses both Bluetooth radio tech- nology as well as a digital signal processor (DSP) to carry out telephone functions.
Introduction Bluetooth ® is a wireless communication system with a short range. It makes possible wireless connections between Bluetooth mobile telephones, PDA and PCs. Bluetooth dard for operation in the internationally recognised ISM Frequency Range (Industrial, Scientific and Medical). Within the ISM Frequency Range (2.402 - 2.480 GHz), a data transfer range of ca.
Technical data Operational voltage: ® Bluetooth Specification: ® Supported Bluetooth profiles: HSP and HFP Dimensions (L x W x H): Weight: Operational temperature: Storage temperature: Humidity: Operating Elements 1 Vehicle connector plug 2 Loudspeaker 3 Volume control 4 Multi-function button 5 Microphone 6 LED status display 12-24 Volt DC / 500 mA...
Installing the hands-free appliance in a vehicle So that the hands-free appliance can function correctly, it is con-nected to the vehicle cigar lighter socket and provided with electricity from there. • Ensure that the hands-free appliance engages completely and that the operation of the vehicle is not negatively influenced.
Switching the hands-free appliance on and off Switching on: The appliance is switched off. • Press and hold the multi-function button 4 for 3 seconds, until a short and high signal tone is heard. The LED status display 6 blinks every 3 seconds. Switching off: The appliance is in standby mode.
Page 12
• To switch the device off, press and hold the multi-function button 4 for about 3 seconds. A long, low signal tone will be heard and the LED status display 6 extinguishes. • Position the hands-free appliance and the mobile telephone so that they are not more than 1 metre away from each other.
Coupling the hands-free appliance with several mobile telephones You can couple the hands-free appliance with up to eight mobile telephones. However, it can only be connected with one mobiletelephone. If a further mobile telephone is coupled with the hands-free appliance, the coupling information of the first coupled mobile telephone is erased.
Re-establishing the connection If you want to reconnect the hands-free appliance with the last used mobile phone: • Check to see that Bluetooth the hands-free appliance on. When connecting to a previously coupled mobile telephone it is not necessary to enter a pass-code.
Page 15
Note: Voice dialing is only available with mobile telephones that support this function. Further information regarding voice dialing is to be found in the operating instructions for your mobile telephone. Accepting and ending a call When you receive a call the LED status display 6 blinks and you hear a call tone from the hands-free appliance.
Adjusting the volume of the hands-free appliance You can adjust the volume of the hands-free appliance with the assistance of the volume controller 3. • During a call, turn the volume controller 3 until the desired volume level is heard. Troubleshooting If you cannot connect the hands-free appliance with a compatible mobile telephone, proceed as follows:...
Cleaning and Care Danger of electrocution! • Before cleaning, always separate the electricity supply from the appliance! • NEVER submerse the appliance in water or other liquids! • Do not permit liquids to permeate into the housing! • Never open the housing of the appliance! There are no user-serviceable elements inside.
Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department.
Information regarding the conformity declaration We, Kompernaß GmbH, declare that the product SBTF 10 A1 Bluetooth ® Hands- Free Kit conforms to the basic requirements and other relevant provisions of the vehicle directive 2004/104/EC and the R&TTE directive 99/5/EC of the European Union council.
Need help?
Do you have a question about the SBTF 10 A1 and is the answer not in the manual?
Questions and answers