Muting The Microphone; Call Function; Resetting The Hands-Free Set - Silvercrest SBTF 10 D4 Manual

Muting the microphone

You can temporarily mute the microphone
so that the other caller cannot hear you.
♦ Press the
operating LED
now muted.
♦ Press the
You will hear a beep and the operating/charging LED
lights up blue every 6 seconds. The microphone is
now reactivated.

Call function

♦ Use your mobile phone to make a call in the usual way.
♦ To redial the last used number, press the
twice in quick succession. You will hear a beep.
♦ To activate voice dialling, press the
briefly. You will hear a beep.
NOTE
► Voice dialling is only available with mobile phones
which support this function. For more information on
voice dialling, refer to the instruction manual for your
mobile phone.

Resetting the hands-free set

The hands-free set can be paired with up to 8 mobile
phones. To delete the pairing list and reset the hands-free set
to the factory defaults, proceed as follows:
♦ Switch the hands-free set off and on again.
♦ Press and hold the
ously for about 10 seconds. The operating/charging
LED
beeps. The pairing list is deleted and the hands-free set
is reset to the factory defaults.
♦ Afterwards, the operating LED
blue and orange. The hands-free set is now in pairing
mode and can be paired with a new mobile phone.
SBTF 10 D4
button
lights up orange. The microphone is
button
flashes blue and you will hear a series of
. You will hear a beep and the
again to reactivate the sound.
button
and buttons
flashes alternately
during a call
button
once
simultane-
GB │ IE │
43 ■