Prerequisites; Glossary - HID PIVCLASS M2000 Installation And Configuration Manual

1.4 Prerequisites

The following prerequisites are required:
1. Install hardware components, including the following:
PACS panels (if applicable)
Supported Smart Card readers:
pivCLASS (PIN, BIO or CAK)
Veridt Multimode
12 - 24V DC UL294 Access Control/Burglary Power Supply, capable of supporting power
requirements as specified in Section 2 Specifications.
2. Protect the hardware components in the enclosure. See Section 4.3 Enclosure installation.
3. Observe the necessary regulatory information. See Section 7 Regulatory.
4. The pivCLASS Reader Services software has been installed and configured.
5. Ensure Administrators and Users are familiar with PACS operating concepts.

1.5 Glossary

Term Description
Biometrics
BIO
Department of Defense Common Access Cards
CAC
Cardholder Unique Identifier
CHUID
Commercial Identity Verification credential or PIV-C
CIV
First Responder Authentication Credential
FRAC
pivCLASS Authentication Module
PAM
Public Key Infrastructure
PKI
TWIC Private Key
TPK
Transportation Worker Identification Credential
TWIC
6
Introduction PLT-01628, Rev. D.2
January 2019