Suzuki Ciaz Owner's Manual page 113

NOTE:
• Avoid covering the light sensor area of
the windshield with a sticker. The sticker
may impair the performance of the sen-
sor and make the system unable to con-
trol operation of the lights correctly.
• If you changed the ignition mode to "ON"
by pressing the engine switch and the
"AUTO" position remains selected, the
headlights and position lights come on
automatically as the outside gets dark
even with the engine not running. Leav-
ing the lights lit for a long time may lead
to a completely discharged battery.
(3)
Front position lights, tail lights, license
plate lights and instrument cluster lights
are on, but headlights are off.
(4)
Front position lights, tail lights, license
plate lights, instrument cluster lights and
headlights are on.
EXAMPLE
AUTO
OFF
79MM02033
With the headlights on, push the lever for-
ward to switch to the high beams (Main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (Main beams) are on, a light on the
instrument panel will come on. To momen-
tarily activate the high beams (Main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
BEFORE DRIVING
Auto-on headlight system
EXAMPLE
(5)
68PH00253
The Auto-on headlight system automati-
cally turns on all lights that are operated by
the lighting control lever on the steering
column, when all of the following three
conditions are met.
Conditions for Auto-on headlight system
operation:
1) It is dark around the light sensor (5).
2) The lighting control lever is in the
"AUTO" position.
3) You press the engine switch to change
the ignition mode to "ON".
This system is operated by a signal from
the light sensor (5) on the passenger's
seat side Instrument panel. Do not cover
the sensor (5). If you do, the system will
not work correctly.
79MH0-74E
2-90