Suzuki Ciaz Owner's Manual page 284

INSPECTION AND MAINTENANCE
Replacement of the battery
(For Petrol Engine Model)
EXAMPLE
(3) (1)
(2)
(For Diesel Engine Model)
EXAMPLE
(3) (1)
(2)
79MH10702
7-23
To remove the battery:
1) Disconnect the negative cable (1).
2) Disconnect the positive cable (2).
3) Remove the retainer nuts (3) and
remove the retainer (4).
4) Remove the battery.
To install the battery:
1) Install the battery in the reverse order of
removal.
2) Tighten the bracket bolt and battery
(4)
cables securely.
NOTE:
• When the battery is disconnected, some
of the vehicle's functions will be initial-
ized and/or deactivated.
51KM038
These functions are required to be reset
after the battery is reconnected.
• Do not disconnect the battery terminals
for at least one minute after the ignition
switch is turned off, or the engine switch
is pressed to change the ignition mode
to "LOCK" (OFF).
(4)
WARNING
Batteries contain toxic substances
including sulfuric acid and lead. They
could have potential negative conse-
quences for the environment and
human health. Used batteries must
be disposed of or recycled according
to applicable rules or regulations and
must not be disposed of with ordi-
nary household trash. Make sure not
to tip over the battery when you
remove it from the vehicle. Other-
wise, sulfuric acid could run out and
you might get injured.
NOTICE
Do not use regular battery in ISG
Vehicle. Use only Exide Ecoserve
DIN70 (for diesel) and Exide Con-
servo N55 (for petrol) battery, else it
may deteriorate Smart Hybrid perfor-
mance.
79MH0-74E