Suzuki Ciaz Owner's Manual page 157

Type A
(5) (6)
EXAMPLE
79MM03024
(5) Cruise control indicator light
(6) "SET" indicator
1) Turn on the cruise control system by
pushing "CRUISE" switch (1). When the
cruise control indicator light (5) appears
on speedometer, you can set cruising
speed.
2) Accelerate or decelerate to the desired
speed.
3) Push "SET –" switch (4), "SET" indica-
tor (6) appears on the speedometer.
Take your foot off the accelerator pedal
and the set speed will be maintained.
Type B
(7) (8)
EXAMPLE
68PM00366
(7) Cruise control indicator
(8) "SET" indicator
1) Turn on the cruise control system by
pushing "CRUISE" switch (1). When the
cruise control indicator (7) appears on
information display, you can set cruis-
ing speed.
2) Accelerate or decelerate to the desired
speed.
3) Push "SET –" switch (4), "SET" indica-
tor (8) appears on the information dis-
play. Take your foot off the accelerator
pedal and the set speed will be main-
tained.
WARNING
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and check that the cruise control
indicator (5) or (7) disappears when
the system is not in use.
OPERATING YOUR VEHICLE
NOTE:
Established cruising speed may differ a lit-
tle from the speed meter indication
depending on the road conditions.
Changing speed temporarily
When the cruising speed is maintained,
you can temporarily accelerate or deceler-
ate.
To accelerate, depress the accelerator
pedal. When you take your foot off the
pedal, your vehicle will return to the set
speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and "SET"
indicator light (6) on speedometer or "SET"
indicator (8) on information display will dis-
appear.
To resume the previously set speed, push
"RES +" switch (3) and "SET" indicator
light (6) on speedometer or "SET" indicator
(8) on information display will turn on again
when vehicle speed is above 40 km/h (25
mph). The vehicle will accelerate to the
previously set speed and maintain its
speed.
NOTE:
For automatic transaxle vehicle, when the
cruising speed is maintained, you cannot
decelerate by using the engine brake even
if you downshift from higher gear to 3rd in
the manual mode.
To decelerate while the cruise control is
on, depress the brake pedal or push down
the "SET –" switch (4).
79MH0-74E
3-36