Advertisement
Available languages
Available languages
Unfreezing set time
Hold down the red O button while pressing ¢, £ and ¢ in succession.Then release the O button.The set time is no longer frozen.
1
2
Set a new tanning time and press the green I button to switch the lamps on.
Operating hour registration
1
Select • to set the time.
2
Set the time to 00.
3
Set the body cooler to position O.
4
Press the O button to display the operating hours.
The maximum number of hours that can be displayed is 999.When this value has been reached, the counter will start counting up from
000 again.
5
When you release the O button, the number of operating hours disappears from the display.
Setting the menus
To enter the owner's menus, hold down the I button while pressing ¢, £, ¢, the O button, £ and ¢ in succession.Then release the I button.
C00 will appear on the display.
B
Press ¢ and £ to navigate through the menus.
B
Setting the operating hours (menu C01)
The standard setting is 400 hours.You can change this setting.The selection range is 150-750 hours.
1
Press the I button.
2
To increase the number of operating hours, press the O button.
The step size is 50 hours.
The display counts up to 750. If you continue to press the O button when 750 has been reached, the display will start counting up from
150 again.
3
Confirm the new setting by pressing the I button again.
Time setting menu (C02)
The default setting is 0, which means that users can adjust the tanning time between 0 to 24 minutes according to their own wishes.
1
Press the I button.
2
Press the O button once to select setting 1.This setting allows users to set the tanning time between 1 minute and a maximum time to
be set in menu C03.
3
Confirm the new setting by pressing the I button again.
Users cannot set a tanning time that is longer than the maximum tanning time set, but they can set a shorter time.
Note: If you have selected setting 1 in menu C02 and have accidentally limited the tanning time to 1 minute in menu C03, users will not be able to
B
set a tanning time.
Setting maximum tanning time (menu C03)
This option is only available to you if you have selected setting 1 in menu C02.
1
Press the I button.
2
Hold down the O button to increase the time in minutes.
The display counts up to 40 (24 for the HB604/6000SX). If you continue to hold down the O button when 40 (24 for the HB604/6000SX) has
B
been reached, the display will start counting up from 1 again.
Use this option to shorten the maximum settable tanning time for users.
3
Confirm the new setting by pressing the I button again.
Setting the cooling time (menu C04)
The default setting is 180 seconds.The selection range is 30-900 seconds.
1
Press the I button.
2
Hold down the O button to increase the time in seconds.
The step size is 30 seconds.
B
The display counts up to 900. If you continue to hold down the O button when 900 has been reached, the display will start counting up from 30 again.
3
Confirm the new setting by pressing the I button again.
B
Note: As the facial tanner requires a cooling time of 180 seconds, we advise you not to set a shorter cooling time.
Retrieving software data (menu C05)
Select this menu to view the version number of the software.
You may need this information when you require service.
B
Resetting operating hour counter (menu C06)
When you are in this menu, press the O button to reset the operating hour counter.
This will remove the œ from the display.
B
'Facial-off blocking' function (C07)
The default setting is 0, which means that the 'facial-off blocking' function has not been activated. Confirm the new setting by pressing the
I button again.
ENGLISH
9
Advertisement
