Advertisement
Available languages
Available languages
ENGLISH
8
Adjusting functions
Use the ¡ and ™ buttons to switch from function to function (fig. 18).
1
The blinking symbol indicates which function is being adjusted.
2
Options:
Select • to set the time.
-
Select ª to set the facial tanner.
-
-
Select ≠ to set the body cooler.
Setting the time for a tanning session
Select • to set the time.
1
Press the ¢ button to put the time forward and push the £ button to put the time backward (fig. 19).
2
Keep the button pressed in to adjust the time more quickly.
Setting the facial tanner
Select ª to set the facial tanner.
1
Press the ¢ and £ buttons to set the intensity of the facial tanner (fig. 20).
2
-
O = off
-
1 = 50% of its full intensity
-
2 = full intensity
If you have not set the intensity within approx. 5 seconds, the set tanning time will be shown on the display again.To set the facial
tanner, select ª.
If you do not set the facial tanner, the facial tanner will burn at full intensity.
Setting the body cooler
Select ≠ to set the body cooler.
1
Press the ¢ and £ buttons to set the fan power of the body cooler (fig. 21).
2
-
O = no body cooling
-
1 = body cooler fan at minimum setting
-
2 = body cooler fan at moderate setting
-
3 = body cooler fan at high setting
-
4 = body cooler fan at maximum setting
If you have not set the fan power within approx. 5 seconds, the set tanning time will be shown on the display again.To set the body
cooler, select ≠.
If you do not set the body cooler, the body cooler fan will work at maximum setting.
Tanning
1
Put on the protective goggles provided.
2
Switch the tanning lamps on by pressing the green I button.
The display shows the remaining tanning time.
During the tanning session, the dot next to the time indication blinks.
If you want to switch the appliance off during the tanning session, press the red O button.
B
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed). Symbol – and the remaining cooling time (180-0 seconds) are shown on the display.
You can adjust the intensity of the facial tanner during the tanning session. Use the ¡ and ™ buttons to select ª and then set the
required intensity.The new setting becomes active immediately.
B
If you have not set the intensity within approx. 5 seconds, the remaining tanning time will be shown on the display again.
If you want to set the facial tanner from O (off position) to 1 or 2 while the lamps have not yet cooled down sufficiently, the O symbol will blink on
B
the display.
You can adjust the fan power of the body cooler during the tanning session. Use the ¡ and ™ buttons to select ≠ and then set the
required power.The new setting becomes active imediately.
If you have not set the fan power within approx. 5 seconds, the remaining tanning time will be shown on the display again.
B
During the last 5 seconds of the tanning session,you will hear a beeping sound and the appliance will switch off automatically after these
5 seonds.
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
B
standard setting has not been changed). Symbol – and the remaining cooling time (180-0 seconds) are shown on the display.
Adjusting the appliance
Owner's instructions for adjusting the appliance
This part of the manual contains information about additional adjustment options for the owner.
B
Setting the additional options
Freezing the set time
Select • to set the time.
1
Press the ¢ button to put the time forward and push the £ button to put the time backward.
B
Keep the button pressed in to adjust the time more quickly.
B
Hold down the red O button while pressing the ¢ button, the £ button and the ¢ button in succession.Then release the O button.
2
The set time is now frozen.
B
The set time can no longer be adjusted.
Symbol • stops blinking.
3
Switch the tanning lamps on by pressing the green I button.
Advertisement
