3 Configuration
3.6.9
Extending the counter limits
This chapter refers to the extension of the counting range of channel 0 and
Note
channel 2. For more information, please see chapter 2.4 of this document.
Requirements
The counter module has been added in the HW Config.
For the counter limit extension of channel 0, channel 1 must be unassigned.
For the counter limit extension of channel 2, channel 3 must be unassigned.
Procedure
1. Open the SIMATIC Manager.
2. Open your PCS 7 project/multiproject
Figure 3–69: SIMATIC Manager
3. Open the hardware configuration for your automation system.
4. Open the configuration interface by double-clicking the FM 350-2 counter
module.
Counter Module SIMATIC FM 350-2
V1.0, Item ID: 83146298
72