Measurements - Siemens SIMATIC FM 350-2 Configuring

3 Configuration
3.6.3

Measurements

Requirements
The FM 350-2 counter module has been added in the HW Config.
The driver block is connected to a channel.
Procedure
1. Open the SIMATIC Manager.
2. Open your PCS 7 project/multiproject
Figure 3–41: SIMATIC Manager
3. Open the hardware configuration for your automation system.
4. Open the configuration interface by double-clicking the FM 350-2 counter
module.
Counter Module SIMATIC FM 350-2
V1.0, Item ID: 83146298
49