Adding A Driver Block In The Master Data Library - Siemens SIMATIC FM 350-2 Configuring

3 Configuration
3.4

Adding a driver block in the master data library

Requirements
You have a master data library.
"PCS 7 AP Library Vxx" is not used as the master data library.
Procedure
1. In the "File" menu, select the "Open" command.
The "Open Project" dialog box is displayed.
2. Open the "Libraries" tab.
3. Select the "PCS 7 AP Library V80" library and your master data library from the
list.
Figure 3–20: Library selection
4. Click the "OK" button. The libraries are opened in the component view.
5. In the tree view, select the entry labeled "PCS 7 AP Library V80\Blocks +
Templates\Blocks".
Counter Module SIMATIC FM 350-2
V1.0, Item ID: 83146298
33