Sper scientific 800012 Instruction Manual

Sper scientific 800012 Instruction Manual

Rh/temperature pen

Advertisement

FIVE YEAR WARRANTY

Sper
Scientific
warrants
this
product
against defects in materials and workman-
ship for a period of five years from the date
of purchase, and agrees to repair or
replace any defective unit without charge. If
RH/Temperature Pen
your model has since been discontinued,
an equivalent Sper Scientific product will be
substituted if available. This warranty does
800012
not cover damage resulting from accident,
misuse, or abuse of the product. In order to
obtain warranty service, simply ship the unit
postage prepaid to:
Instruction Manual
SPER SCIENTIFIC LTD.
7720 East Redfield, Suite 7
Scottsdale, Arizona 85260
(480) 948-4448
www.sperscientific.com
Please Note: The defective unit must be
accompanied by a description of the
problem and your return address. Be sure
to register your product online or return
your warranty card within 10 days of
purchase.
Rev. 2/26/2010
- 8 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 800012 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sper scientific 800012

  • Page 1 If RH/Temperature Pen your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available. This warranty does 800012 not cover damage resulting from accident, misuse, or abuse of the product.
  • Page 2 RH/ Temperature Pen 800012 Copyright ©2009 by Sper Scientific ALL RIGHTS RESERVED Printed in the USA The contents of this manual may not be reproduced or transmitted in any form or by any means electronic, mechanical, or other means that do not yet exist or may...
  • Page 3 SPECIFICATIONS MEASUREMENT PROCEDURES 1. Press A for 3 seconds to turn the meter on or off. 2. The meter will turn off automatically after 10 minutes of inactivity. 3. To view the ∆ (difference) measurement, press A for 0.5 second. The unit will start at zero and then display the ∆...
  • Page 4 MEASUREMENT PROCEDURES BATTERY REPLACEMENT 4. The Max and Min data will be 1. Turn the unit off by pressing A for 3 reset when the unit is turned off. conds. Changing Temperature Scale 2. Twist off the battery cover and replace with one AAA 1.5V battery ensuring correct 1.

Table of Contents