Removing The Power Supply Unit Blank - Dell DSS 1510 Owner's Manual

After working inside your system
Removing a cabled power supply unit
Related reference
Safety instructions

Removing the power supply unit blank

Install the power supply unit (PSU) blank only in the second PSU bay.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Steps
If you are installing a second power supply unit (PSU), remove the PSU blank in the bay by pulling the blank outward.
CAUTION: To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a non-redundant
configuration. Remove the PSU blank only if you are installing a second PSU.
Figure 53. Removing the PSU blank
a. PSU blank
b. PSU bay
Next steps
Install the PSU or PSU blank.
Related tasks
Installing a redundant power supply unit
Installing the power supply unit blank
Related reference
Safety instructions
Installing and removing system components 99