Installing The Expansion Card Riser - Dell DSS 1510 Owner's Manual

Figure 35. Removing the expansion card riser
1. expansion card riser
3. slot on the chassis
Next steps
1. Install the expansion card riser.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system

Installing the expansion card riser

After working inside your system
Related reference
Safety instructions
Installing the expansion card riser
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. If applicable, reinstall the expansion card into the expansion card riser.
Steps
1. Align the expansion card riser latch with the slot on the chassis.
2. Lower the expansion card riser until the expansion card riser is firmly seated in the connector, on the system board.
2. touch points on the riser
4. riser connector on the system board
Installing and removing system components 79