Table of Contents
Advertisement
Figure 44. Removing a processor
1. socket-release lever 1
3. processor
5. processor shield
7. processor socket
Next steps
1. Install a processor.
2. Install the heat sink.
3. If removed, reinstall the PCIe expansion card riser.
4. If disconnected, reconnect the cables to the expansion card(s).
5. Reinstall the cooling shroud.
6. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Removing the expansion card riser
Removing the cooling shroud
Removing a heat sink
Installing a processor
Installing a heat sink
Installing the expansion card riser
Installing the cooling shroud
After working inside your system
Related reference
Safety instructions
2. pin–1 corner of the processor
4. slot (4)
6. socket-release lever 2
8. tab (4)
Installing and removing system components
89
Advertisement
Table of Contents
Troubleshooting
