2
3
Copyright © 2008 Nortel Networks
.
Figure 24
Loosening the rack-mounting screws: 8003 chassis
Slide the bracket onto the loosened screws.
For more information about sliding the bracket onto the screws,
see
Figure 25 "Sliding the bracket onto the screws: 8010 and
8006 chassis" (page 53)
the screws: 8003 chassis" (page
Figure 25
Sliding the bracket onto the screws: 8010 and 8006 chassis
Figure 26
Sliding the bracket onto the screws: 8003 chassis
Tighten the screws to secure the bracket to the chassis.
For more information about tightening the screws, see
"Securing the bracket to the chassis: 8010 chassis" (page
Figure 28 "Securing the bracket to the chassis: 8006 chassis"
Nortel Ethernet Routing Switch 8600
Installation — Chassis
NN46205-303 02.01 Standard
30 May 2008
Installing the cable management brackets 53
and
Figure 26 "Sliding the bracket onto
53).
Figure 27
54),