Angle - DAL-BO MaxiDisc Manual

Angle

The discs can be hydraulically adjusted from 0 to 20 degrees. With hydraulic
adjustment, all discs are adjusted at the same time.
The angle of the front row and the back row of discs can be adjusted individu-
ally with the turnbuckle (A). It is generally recommended that you set the row
in the back slightly more aggressive than the row in the front to prevent the
machine from pulling unevenly.
Side 16
Lengthen or shorten the turnbuckle
(A) according to needs.
If the soil is very dry and hard, set
the front row of discs more aggres-
sively than the row in the rear to
increase power and effect.
Type
Maxidisc 300 (80150)
Maxidisc 300 (80150)
Maxidisc 400 (80160)
Maxidisc 400 (80160)
Maxidisc 300 Ü (80151)
Maxidisc 300 Ü (80151)
Maxidisc 400 Ü (80161)
Maxidisc 400 Ü (80161)
Maxidisc 400 ÜH (80171)
Maxidisc 400 ÜH (80171)
Maxidisc 400 (80005)
Maxidisc 400 (80005)
Maxidisc 500 (80010)
Maxidisc 500 (80010)
Maxidisc 600 (80020)
Maxidisc 600 (80020)
Maxidisc 400 (80006)
Maxidisc 400 (80006)
Maxidisc 500 (80016)
Maxidisc 500 (80016)
Maxidisc 600 (80026)
Maxidisc 600 (80026)
MaxiDisc
Fig. 6
A
Turnbuckle length (A)
Turnbuckle length abt. [mm]
444
431
444
431
538
524
415
401
442
457
442
457
442
457
398
383
407
421
407
421
433
419
Specification [degree rear/front]
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0
20/20 ; 0/0
23/20 ; 3/0