Unhitching
The MaxiDisc must be completely folded up (in the transport position) or un-
folded and resting securely on the ground before unhitching.
Swing the hitch stand into place and secure with a pin. Disconnect the hydrau-
lic hoses, lower the MaxiDisc and remove the lift arms from the hitch.
Remember to relieve the pressure in the hydraulic system before discon-
necting the hoses.
Unhitching of the MaxiDisc must always be carried out on even ground. Se-
cure the MaxiDisc against unintentional operation.
Side 14
MaxiDisc